Compact Range
CE 6536T
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 6536T allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height the CE 6536T unique design is unrivalled in its field. This single man conveying operation can receive crushed material and safely stockpile over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed, or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 900mm
- Belt Length: 18700mm
- Max Discharge Height: 8.26m
- Max conical stockpile capacity: 970 cubic metres /1552 Tonnes @1.6T/cu.M
- Transportation length 11700mm
- Transportation height 2591mm
- Track width 2200mm
- Machine Weight 12,000 kgs
The EC approved CE 6536T conveyor range features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time and ease of movement at its final job destination.
Easy to use fully operational dog lead remote control allowing for versatility and outstanding manoeuverability.
The CE 6536T is powered by a Deutz 4 cyclinder Diesel Powerpack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic folding mechanism.
With its powerful chassis and heavy duty tracks the CE 6536T unit ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 6536T unit movement is extremely flexible when fully extended.
- Dust Covers
- Dust Suppression System
- Discharge dust chute
- Picking Platform
- Full Radio Remote controls
PRODUCT ENQUIRY
CE 8042T
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 8042T allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height the CE 8042T unique design is unrivalled in its field. This single man conveying operation can receive crushed material and safely stockpile over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed, or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 1050mm
- Belt Length: 23500mm
- Max Discharge Height: 11.33m
- Max conical stockpile capacity: 2162 cubic metres / 3460Tonnes @1.6T/cu.M
- Transportation length 12000mm
- Transportation height 2591mm
- Track width 2200mm
- Machine Weight 15,500 kgs
Easy to use fully operational dog lead remote control allowing for versatility and outstanding manoeuverability.
Easy to use fully operational dog lead remote control allowing for versatility and outstanding manoeuverability.
The CE 8042T is powered by a Deutz 4 cyclinder Diesel Powerpack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic folding mechanism.
With its powerful chassis and heavy duty tracks the CE 8042T unit ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 8042T unit movement is extremely flexible when fully extended.
- Dust Covers
- Dust Suppression System
- Discharge dust chute
- Picking Platform
- Full Radio Remote controls
PRODUCT ENQUIRY
CE 8042T Direct Feed
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 8042T Direct Feed allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height the CE 8042T Direct Feed unique design is unrivalled in its field. This single man conveying operation can receive crushed material and safely stockpile over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed, or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 1050mm
- Belt Length: 23500mm
- Max Discharge Height: 11.33m
- Max conical stockpile capacity: 2162 cubic metres / 3460Tonnes @1.6T/cu.M
- Transportation length 12000mm
- Transportation height 2591mm
- Track width 2200mm
- Machine Weight 16,500 kgs
- Additional features verses standard 8042T,
- 7 Ton hopper with material metering adjustable door at front
The EC approved CE 8042T Direct Feed features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time and ease of movement at its final job destination.
Easy to use fully operational dog lead remote control allowing for versatility and outstanding manoeuverability.
The CE 8042T Direct Feed is powered by a Deutz 4 cyclinder Diesel Powerpack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic folding mechanism.
With its powerful chassis and heavy duty tracks the CE 8042T Direct Feed unit ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 8042T Direct Feed unit movement is extremely flexible when fully extended.
- Dust Covers
- Dust Suppression System
- Discharge dust chute
- Picking Platform
- Full Radio Remote controls
PRODUCT ENQUIRY
CE 8042TSL
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 8042TSL allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height the CE 8042TSL unique design is unrivalled in its field. This single man conveying operation can receive crushed material and safely stockpile over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed, or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 1050mm
- Belt Length: 23500mm
- Max Discharge Height: 10.0m
- Max conical stockpile capacity: 1487 cubic metres / 2380Tonnes @1.6T/cu.M
- Max Radial stcokpile capacity 9222 cubic metres /14755Tonnes @1.6T/cu.M
- Transportation length 16,110mm on trailer
- Transportation height 2836mm
- Track width 2900mm
- Machine Weight 25,000 kgs
- Additional features verses standard 8042T,
- Radial wheel slew by remote control,
- Anchored hopper over Tracks for radial pivot,
- Fuel consumption from 2.5 litres per hour depending on application and tonnage,
- Internal hub drive in all 8042 machines for increased torque,
- Conveyor can be shipped inside a 40ft high cube shipping container.
The EC approved CE 8042TSL features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time and ease of movement at its final job destination.
Easy to use fully operational dog lead remote control allowing for versatility and outstanding manoeuverability.
The CE 8042TSL is powered by a Deutz 4 cyclinder Diesel Powerpack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic folding mechanism.
With its powerful chassis and heavy duty tracks the CE 8042TSL unit ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 8042TSL unit movement is extremely flexible when fully extended.
- Dust Covers
- Dust Suppression System
- Discharge dust chute
- Picking Platform
- Full Radio Remote controls
PRODUCT ENQUIRY
CE 6542T
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 6542T allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height of 1770mm (5ft) up to an impressive 3700 mm (12 Ft) the CE 6542T is unrivalled in its field.
This single man conveying operation can receive crushed material and safety stockpiles over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 1050 mm
- Belt Length: 19,800 mm
- Max conical stockpile capacity: 2000 Metric Tons
- Transportation length 13478mm
- Transportation height 3583mm
- Track width 2800mm
The EC approved CE 6542T features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time or ease of movement at its final job destination.
Easy to use fully operational dog-lead remote control allowing for versatility and outstanding manoeuverability.
The CE 6542T is powered by a Deutz 4 cyclinder 36Kw engine power pack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic fold.
With its powerful chassis and heavy duty tracks the CE 6542T ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 6542T movement is extremely flexible when fully extended.
- Hydraulic folding conveyor
- Wear resistant hopper liner plates
- Dust Covers
- Water Suppression
- Twin gear box drive for production over 400 Tons per hour
- 37 Kw electric motor power pack with starter panel
- 4 cylinder turbo charged 45 Kw Power Pack
- Extended hopper sides for loading shovel feed
- Hydraulic driven generator for electric connections
- Infrared heaters installed inside picking station
- Lighting inside picking canopy
PRODUCT ENQUIRY
CE 6542TPS
Low Cost Stockpiling Solution with today’s ever increasing fuel prices. Optimum flexibility and mobility with the highest possible performance.
VERSATILITY
The exceptional design of the CE 6542TPS allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height of 1770mm (5ft) up to an impressive 3700 mm (12 Ft) the CE 6542TPS is unrivalled in its field.
This single man conveying operation can receive crushed material and safety stockpiles over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Multi positional cantilever design self adjusting mechanism.
- Conveyor angle adjustment whilst maintaining platform working height.
- Head and tail height adjustment on conveyor.
- 2 bay 4 man working platform with emergency stops at individual stations.
- Heavy duty weather proof canvas cover.
- Variable speed conveyor belt
- Belt width: 1050 mm
- Belt Length: 19,800 mm
- Max conical stockpile capacity: 2000 Metric Tons
- Transportation length 13478mm
- Transportation height 3583mm
- Track width 2800mm
The EC approved CE 6542TPS features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time or ease of movement at its final job destination.
Easy to use fully operational dog-lead remote control allowing for versatility and outstanding manoeuverability.
The CE 6542TPS is powered by a Deutz 4 cyclinder 36Kw engine power pack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic fold.
With its powerful chassis and heavy duty tracks the CE 6542TPS ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 6542TPS movement is extremely flexible when fully extended.
- Hydraulic folding conveyor
- Wear resistant hopper liner plates
- Dust Covers
- Water Suppression
- Twin gear box drive for production over 400 Tons per hour
- 37 Kw electric motor power pack with starter panel
- 4 Cylinder turbo charged 45 Kw Power Pack
- Extended hopper sides for loading shovel feed
- Hydraulic driven generator for electric connections
- Infrared heaters installed inside picking station
- Lighting inside picking canopy
PRODUCT ENQUIRY
Bulk Loading
CE 6542TCL
Tracked loader/unloader complete with sensor probe controlled radial boom. Up to 1000T/H. Wear Resistant hopper liner plates.
VERSATILITY
The exceptional design of the CE 6542TCL allows for tail drum height adjustment whilst at the same time maintaining the head drum height therefore allowing for an increased stockpile capacity. With an adjustable feed boot height of 1770mm (5ft) up to an impressive 3700 mm (12 Ft) the CE 6542TCL is unrivalled in its field.
This single man conveying operation can receive crushed material and safety stockpiles over a quarry face or bench. Its versatility allows for any application whether it be stand alone crusher fed or installed in a close circuit application dealing with crushed stone, sand and gravel, crushed glass, coal and bark etc.
- Belt width: 1050 mm
- Belt Length: 19,800 mm
- Max conical stockpile capacity: 2000 Metric Tons
- Transportation length 12824 mm
- Transportation height 3750mm
- Track width 2800mm
The EC approved CE 6542TCL features a hydraulic head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time or ease of movement at its final job destination.
The CE 6542TCL is powered by a Deutz 4 cyclinder 45Kw engine power pack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic fold.
The CE 6542TCL is powered by a Deutz 4 cyclinder 36Kw engine power pack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic fold.
With its powerful chassis and heavy duty tracks the CE 6542TCL ensures optimum stability and strength regardless of its applications.
With ballast weights at the rear of the CE 6542TCL movement is extremely flexible when fully extended.
- Hydraulic folding conveyor (Standard)
- Wear resistant hopper liner plates
- Dust Covers
- Water Suppression
- 37 Kw electric motor power pack with starter panel
- 4 Cylinder turbo charged 45 Kw Power Pack
PRODUCT ENQUIRY
CE VL Series
Tracked loader/unloader complete with sensor probe controlled radial boom. Up to 1000T/H. Wear Resistant hopper liner plates.
VERSATILITY
The CE VL Series is a unique low level, above ground receiving hopper featuring a radial boom conveyor designed onto a single track mounted chasis for ease of movement and minimum of on-site civil works or permanent structures.
Models: Two models available. 600T/Hr and 1000 T/Hr.
Feeder belt width: 2.4 m
Discharge conveyor belt Length: (two options available) 9.5 m and 13.5 m (optional)
Stabilizing legs on 13.5 m conveyor only (optional)
Feed hopper opening: 4.6 m wide
Discharge conveyor height: 9.5m Long 4946 mm
Discharge conveyor height: 13.5 m Long 6635 mm (optional)
Transportation length: 9.5 m conveyor 14830 mm
13.5 m conveyor 16752 mm (optional)
Transportation height: 3325 mm
Transportation width: 2950 mm
The EC approved CE VL Series features a large 4.6 metre wide track mounted receiving hopper with hydraulic sides as standard. A 2.4 metre wide conveyor belt, feeds the 900mm wide radial boom discharge conveyor with a 130 degree radial slew mechanism. Discharge conveyor features a hydraulic folding head section allowing for quick, efficient compact road transportation as well as allowing for a rapid set up time and ease of movement at its final job destination.
Easy to use fully operational dog-lead remote control allowing for versatility and outstanding manoeuverability.
The CE VL series is powered by a Caterpillar 75 Kw (100 H.P) power pack, directly linked to the hydraulic pump in order to drive both the numerous motors and the hydraulic fold.
With its powerful chassis and heavy duty tracks the CE VL Series ensures optimum stability and strength regardless of its applications.
- Bulk loader/unloader
- Ships
- Barge loader
- Rail car Loader/Unloader
- Stockpiling
- 13.5 m long discharge conveyor with stabilizing legs
- Dual power option: machine fitted with 75Kw electric motor and external panel
- Ultra sonic Sensor probe control for automatic left or right movement on discharge conveyor.
- Hydraulic folding conveyor
- Wear resistant hopper liner plates
- Dust Covers (canvas or metal fabrication available)
- Dust/water Suppression
- Discharge dust chute
- Full radio remote control for travel and operation
PRODUCT ENQUIRY
Static Conveyors
Light, medium and heavy duty conveyors
Production capacity up to 1000 TPH.
Bespoke design to customer’s unique requirements made to easily integrate into an existing system or a new build structure.
We focus on customers unique requirements. Our in house design team offers variety designs and technical support.
PRODUCT ENQUIRY
Hydraulic Engineering
HYDRAULIC ENGINEERING
SCOPE
We repair and manufacture cylinders ranging from 0.2m to 16m long and cater for large as well as small orders. Our workmanship and products comply with O.E.M standards, tolerance and specifications and the owner personally attends to all quality assurance.
All cylinders are thoroughly tested on a custom build test bench and stress beam. Test oil is pre-heated to simulate on site conditions and cylinders are tested to the required accurate working pressures. This test facility enables us to test for external leakages and internal bypass at all stages on barrels as specified by the O.E.M. Standard and a test report is issued each cylinder.
Our in-house equipment consists of: C.N.C. Lathes, Center Lathes up to 4m with a Spindle Bore of 250mm, Millling Machines, Radial Arm Drills, Press Drills, Honing Machines, 350amp CO2 Welding Machines, Hydraulic Test Bench, Stress Beam, Acid Tanks, Pressure Cleaners, Overhead Cranes etc.
All components repaired, manufactured and new items supplied carry a one-year warranty from date of purchase, subject to normal usage and the prescribed maintenance requirements.
This warranty covers defective workmanship, premature seal failure and material defects subject to the cylinders being stored vertically for extended periods and subject to normal usage and return to our premises for assessment.
- Qualified repair technicians make use of the latest equipment.
- All products are disassembled and a computer-based estimate is prepared.
- A detailed report and repair plan then accompanies the quotation for customer approval.
- Test certificates are available to make certain that repaired products conform to the original condition.
- Main repair facilities are situated in Pomona, Bredell
Once a Hydraulic Cylinder is received for repairs, a qualified repair technician will inspect it for any damage and wear, all components are carefully inspected. A damage report is prepared with an estimate of cost, and quotation is then forwarded to the customer for approval.
Our workmanship and product’s comply with O.E.M. Standards, tolerances and specifications and the owner personally attends to all quality assurance.